The method of recycling waste tire is that separates the inner steel wire and fiber from waste tire through many kinds of technology and grinds the rubber granules into powder. Waste tire treatment equipment is suitable for international development and management style. It's merits on that can recovery the waste tire to into rubber granule/powder reaching to the availability 100%. Owing to no second pollution in production process, reusing waste tire is really recycling way called long duration development.
The rubber powders are widely used and hardly cover all industrial lines. It can replace the material such as plastic and pcv, instead of nature rubber, be rebirth tires. It is used in sport runway and shoe sole, it also can be used in highway, air trip as well as third generation railway sleeper as modification asphalt.
1. Put the tyre into the reactor
2. After high temperature pyrolysis, to get oil gas
3. Then going to the cooling system to get fuel oil, carbon black and steel wire finally.
4. Safety device and high technology to make sure the equipment safe and efficient. The output are Crude oil, Carbon black and steel wire, after a further process can make a kind of fuel, widely used in the areas like cement factory, steel factory, glass factory for heating, also can be used for heating pyrolysis plant.
NO |
MODEL |
Total Power ( KW/h ) |
Production Capacity (kg/h) |
| 1 rubber crusher |
RM-TR-400 line |
About 103.2kw |
100-200kg for around 10-30 mesh rubber powder. |
| RM-TR-450 line |
About 113.2kw |
300-400kg for around 10-30 mesh rubber powder |
| RM-TR-560 line |
About 132.2KW |
500-600kg for around 10-30 mesh rubber powder. |
| Model |
RM-TR-400 |
RM-TR-450 |
RM-TR-560 |
| Roll Diameter*length |
400*600 |
450*760 |
560*800 |
| Roll Ratio |
1:1.38 |
1:1.38 |
1:1.39 |
| Front roll ratio |
17.16 |
23.43 |
27.14 |
| productivity |
70~600 |
1000 |
2000 |
| Motor power(kw) |
45kw |
60/75KW |
75/90kw |
| LxWxH(mm) |
4210*1850*1925 |
4550*1970*1860 |
5620x2260x1900 |
| Weight(kg) |
7500kg |
11000kg |
19000kg
|
| Tire shredder Model |
TS-900 |
TS-1200 |
| Production capacity |
0.8-2ton/h |
1.5-3ton/h |
| Size of feeding |
≤900mm whole tyre |
≤1200mm whole tyre |
| Specification of the slice |
≤50*50mm |
≤50*50mm |
| Motor power |
74kw(37*2) |
150kw(75*2) |
| Cutter rotate speed |
16r/min |
31r/min |
| Screener rotate speed |
6r/min |
8r/min |
| Dimension |
2.8*2.1*2.4m |
5.2*2.8*3.5m |
| Weight |
10.2T |
19.8T |
Audited Supplier 
){kind=link}